M14 Forum banner

1911 A1 Remington Rand - 1943 type II

1 reading
3.5K views 8 replies 4 participants last post by  Louis1332  
#1 ·
I’ve been wanting a second 1911 A1 to go with my 1943 Colt for a while now

Image


I found this 1943 type II Remington Rand from a private seller, who was selling most of his collection, he also had a 1945 Colt and several Sig P210. He initially wanted $ 2400.-, we settled at $ 1950.-. Barrel is a High Standard

Image


It came with this magazine which I suppose is WWI vintage

Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


I have a Scovill magazine that is better suited to this gun

Image


Image


I had never seen the Du-Lite finish. It’s obviously very different from the traditional high polish blueing of the commercial models or the Parkerising of later military models, it’s a kind of graphite grey.
 
#3 · (Edited)
Thanks

A couple of years ago I bought a few USGI small parts in the US to enhance my Auto Ordnance 1911 A1

So I now cannibalised it and replaced the thumb safety and the trigger. I will still need to find a correct hammer.

Image


Image


A few inside pics

Image


British proof marks under the left grip

Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


The hole for the slide stop is chamfered, is that original ?

Image


Image


I thought I’d post my USGI trio too

Image


Image
 
#7 ·
The Remington Rand pistols used a ribbed mainspring housing. What is on your pistol is a Colt or Ithaca housing. And the Remington Rand housing has 8 ribs, not the 7 rib housing found on other pistols.
From the research I just made, that is correct for a type III, not for a type II which has a checkered MSH

Type III

Image


https://www.gunauction.com/buy/148...4daevYkUg0aD3f6km5WqFAmHVdTAbWe7_WOnaILoxaZdsKjFcUmtkgC1Vw5bK-s9CY9-6ZCcNb3H8QQ

Type II

Image


https://www.gunauction.com/buy/168...sHbvmX93i4N1M2MPST1BgwGHDnb9gd7710brpQ5a51n3mlHzpWz9w4pKNC7APHYOyoL8YZG3hdAgNdA