M14 Forum banner

White filling for the windage & Elevation knobs

3734 8
I have tried whiting in the grooves for the windage marks and both elevation and windage knobs. I've tried both crayon and white paint. Is there a better/easier way to do this? The crayon comes out easily when you rub the excess off :( and the paint seems to leave a slight film :( . I'm open to suggestions....
1 - 9 of 9 Posts

·
Registered
Joined
·
90 Posts
Paint elevation knob

Hawk,I use TESTOR's model paint--I apply it but let it dry about 10
minutes before using the Qtip and WD40 to remove the excess,seems
to work for me as can be seen from my pic.
 

·
Registered
Joined
·
36 Posts
White Paint fill on Sights

Here's a real "ghetto" way that we've been doing up here in Kanada:

Whiteout (Office stuff) in the handy "pen" style applicator, works really well in all your sight knobs, bolt/ M14 part/drawing numbers, too.

Then ACETONE off the excess... Have fun :lol:

At least we can remove the stuff if we ever need to....

Cheers,
Barney
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top