M14 Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
187 Posts
Discussion Starter · #1 ·
I want to refinish a stock and i noticed a few people using walmart krylon paint. I heard of people using Aluma-Hyde II with good results. It will be done on a fiberglass stock. I got a all the colors in krylon camo colors to go ahead with it but then i decided i think i rather use Aluma-Hyde II. I plan on OD finish it and if i decide to camo i will use the krylon camo paint for that. Aluma-Hyde II is post to be alot sronger and i don't want oaint coming off so like to do it right first time. Any other tips with the paint be helpful,thanks.
 

·
Banned
Joined
·
10,629 Posts
just remember that Alumahyde paints need to be heat cured.....an easy way to accomplish this would be to construct an old fashion incubater out of plywood and a drop light. I've dfone this and it works real well
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top