M14 Forum banner
1 - 4 of 4 Posts

· Banned
Joined
·
11,516 Posts
Discussion Starter · #3 ·
roger that....the only reweld that is legal currently is the Hahn welded receiver, and even that is subject to conformitty to the letter of approval. Most don't qualify due to the demill process which is considered incorrect. The other things are the rear auto lug has to be removed, the center notch has to be moved and the under side of the front end of the receiver where the connector rod has to be welded so that the connector can't "hook in". If all of these are done then they are deemed legal.....that is if the receivers are stamp marked as electro pencil has been deemed not acceptible as it can be readily removed. That said, if this receiver is the real deal then you would have to have a class III whether it has the connector arm or not or whether the rear auto lug has been welded or not. If it's a MKS then that's alltogether a different story. Don't even look at it. :roll:
 

· Banned
Joined
·
11,516 Posts
Discussion Starter · #5 ·
according to the seller....the rifle was sent to the ATF and was sent back, but he can't find the tag. I asked him where the welds are and how they look. Am awaiting a reply. Also, He stated that he doesn't know who welded it up.
 

· Banned
Joined
·
11,516 Posts
Discussion Starter · #7 ·
Ox.....shhhhh let's not open that can of worms :roll: :roll: :roll: :roll:

However the guy said that the only welding on the rifle was the autolug.....makes ya wann say....HMMMMMMMMM
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top