M14 Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
845 Posts
If you have compressed air handy and the epoxy/glue is thin enough with a good working time, you can sometimes use that to get the glue into the deeper part of the crack if a thinned toothpick, or better yet, a thinned piece of bamboo skewer to work it into the deepest parts of the crack.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top