M14 Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
274 Posts
Discussion Starter · #1 ·
Is there anything to worry about when installing a used GI bolt? Such as heat treatment, or previously lapped lugs, or anything else, or are these generally safe.

The bolt is in good used condition that I am getting.
 

·
Registered
Joined
·
168 Posts
warbird said:
I've had a couple that were cracked around the ejector hole. It was a TRW bolt.
8O NOOOOOOOO!!!!! SAY IT ISN'T SO!!!!!!!! :cry: :cry: :cry:

Anybody WANT an all TRW SA M1A that shoots 1 MOA?

FREE !!!!

:evil: I don't want it if it's got these inferior TRW parts on it ! * :evil:

(* Just kidding ;) )
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top