M14 Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
20 Posts
Help from the North

Here is a link that should help you and others on this board. It is to our Canadian site where we play with M1A and M305's.

http://www.canadiangunnutz.com/viewforum.php?f=10

You can most certainly unitize the gas system with a mig welder. you want a tack welf at 10, 2 and 6 oclock when looking from the muzzle. Suggest you leave the rifle in the stock when doing this to ensure that everything is in alignment.

Don't weld a long bead, just a 1/4" tack is plently and let things cool between welds. Takes a second to do.

Good luck...

Jerry
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top