M14 Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter · #1 ·
Sorry to raise this tired subject. I used the search function and looked at a dozen threads on the Ultimak installation and all the ones I saw were at least a couple of years old with dead links. I also checked you tube and could not find a good installation video for mounting the M8 rail. Does anyone have a link or can anyone show me a particular thread with a good link? Has anyone used one of these Ultimak rails with a Minelli stock? Thanks.
 

·
Read Only
Joined
·
840 Posts
Mine is mounted in a Boyds walnut stock and fit with no problem. Is the Minelli a problem fitting? I just followed the directions and made sure the rail is perfectly aligned with the flat spot behind the rear sight. Used a 4 inch bubble level to align it.

I get an even space on either side of the mount to the stock. About a credit card thick space.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top