M14 Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,120 Posts
BEST VISE for barreling. You are correct 1.10" is what you need for M1&M14 barrels. Grab the barrel right at the barrel shank. I use rosin powder& 1 wrap of newspaper the width of the blocks. Level up front sight base tighten down center screw of VISE and you are good to go. I use an old Rem 700 barrel as a cheater for tightening. Plus Al is a great guy and last time I chatted with him he has working on a action wrench with inter changeable heads for different actions.
Pfc out
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top