M14 Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1,608 Posts
There are 1001 ways to dress up a fiberglass stock.. Some guys rattle can them, some guys dip them, some guys air brush them, there are a few other methods, but they slip my mind right now. The method that would work best for you depends on the scheme you want to use on the stock, the equipment you have available to do the work, and the amount of $ you want to spend on the project.

I guess what I'm asking for is some more information.. :)
 

·
Registered
Joined
·
2,519 Posts
You might want to scroll down to the stock forum and do some research on past threads. There have been many folks inputting info as to how and what to do when painting them. There are also a lot of pictures so grab a fresh pot and go back several months working through applicable threads. Keep us posted and pictures always work here.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top