M14 Forum banner
1 - 17 of 17 Posts

·
Registered
Joined
·
1,363 Posts
I use Leupold QRW low rings on my M25 but my scope is a 40mm, not 50mm.
I have not had any problems with them and they were not that pricey.

You may need medium height for the 50mm objective.

Many choices out there and many others will chime in.

Mark IV rings on a Mark IV scope makes sense.

Very nice choice for a scope too.......

Ole Silver
 

·
Registered
Joined
·
933 Posts
Here's my SA with the Bassett High Picatinny
Burris Xtreme Tactical Low Rings
And a SightMark 8.5-25X50mm
Very solid set-up
The Bassett does not use the Clip Guide Dove Tail


 

·
Registered
Joined
·
37 Posts
I use the Bassett low mount with a set of Vortex precision low rings that hold my Vortex Viper PST 4-16x 44. Quick set up, can still use irons, and will return to zero, no extraction issues. I think I bought it here in the PX.
 

·
Registered
Joined
·
933 Posts
One thing’s for certain, you can NOT have anything in or on the Threads
Both in the Receiver and on the Bolt
Best to clean the Threads with Acetone or Rubbing Alcohol
Nothing that could leave a residue
 
1 - 17 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top