M14 Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
4,006 Posts
The bolt used on the receiver is often made with a smaller diameter shaft which will allow a certain amount of offset. If the hole in the mount covers part of the receiver hole the mount will have to be modified.

Yes, to Ted's advice above. I've nener heard of TSA, so I'm assuming it is a cheaper mount, and don't have much to loose if the part is screwed up. Under no circumstances mess with the receiver hole. dozier
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top