[lefisherman1890]

Hello everyone,

I have now passed 500 rounds through my beloved Springfield Standard M1A and I know I need to clean my gas system soon. I have done some research and found another post about how certain Sadlak tools did not fit certain runs of the m1a due to dimension differences. My standard was made last year and there wasn't much updates from the post on whether or not a separate tool was made specifically for non-usgi dimension parts.

I am looking to buy the 4-piece sadlak tool set but is there anything else I need to clean the gas system?

Also does the sadlak wrench have a ball bearing tool (to lube the roller bearing on the bolt) integrated into it? I see a lot of holes but cannot find any information on this.

If the information is already out there I apologize ahead of time for submitting a redundant post but I just want to buy a set of tools that will last a while and make sure its a one time purchase.

Thank you all!

 

[hytekrednek]

The sadlak tool does not have a bolt roller lubing cup.

 

[smoothy8500]

I just happen to be lucky and have some specialized tools. I use a Mk1 Wrench-crescent, Medium (M) with a rag to protect the GC. Then I use the Mk1 mod 0 Thumb-right (R) to push grease in the bolt roller. I'd be bummed if I had to buy those tools all over again.

 

[Capona]

Sadlak tools does not have a l
Bolt roller grease tool. The GI tool does, as does the basset tool for putting on their scope mount. Brownells sells a bolt roller greaser tool. Your palm will work fine. Some people use a spent .45 cartridge.

 

[Wasted ammo]

When your order your gas cylinder wrench you might want to get the oversized one or at least measure the one you have. Sadlacks web sight has info on this.

 

[hytekrednek]

If you have any doubt, call Sadlak and talk to them. They are very knowledgeable and helpful.

 

[KurtC]

The gas system was designed to be cleaned with nothing more the 3/8" box wrench (combination tool) and the chamber brush, along with some bore cleaner. RNGR2

The roller is not even a grease point, but it seems to help people sleep better at night. The grease goes on the outside of the bearing, in the oprod recess.

 

[valken]

Do people use a spent .45 cartridge.

Yes, I do. Been using that and my fingers too. Just place lube on the side end of the roller and apply pressure till you see grease come out the other side.

 

[Capona]

Yes, I do. Been using that and my fingers too. Just place lube on the side end of the roller and apply pressure till you see grease come out the other side.

Meant to say some people use .45.
This iphone spellchecker seems to have a mind of its own lately.

 

[Wjchastain]

The gas system was designed to be cleaned with nothing more the 3/8" box wrench (combination tool) and the chamber brush, along with some bore cleaner. RNGR2

The roller is not even a grease point, but it seems to help people sleep better at night. The grease goes on the outside of the bearing, in the oprod recess.

I use the Badger Ordnance bolt roller greaser and it works great, I keep it under my pillow at night to help me sleep.

 

[DaMoose]

45 bore brush is perfect for the gas system

 

[mercman]

As was stated a bolt roller greaser can be made out of spent .45 casing. Drill and tap the primer pocket, insert and Loctite a brass screw. The case can be cut down using a tubing cutter to an appropriate depth. Or as was stated grease can just be forced into the area with your fingers.

 

[valken]

^^^^^^^^^^^^^^^^ What he said.

 

[Snyper762]

I sleep better at night knowing I've got the tools for cleaning, even a few bolt roller grease tools.

 

[Wasted ammo]

Maybe I need to order one, I haven't been sleeping worth a damn.

 

[lefisherman1890]

Thank you everyone for your feedback. I called sadlak and placed in my order for a gas wrench and their drill set. Although I wish I had spent that money on ammo, I feel better knowing that I can fully take care of my rifle now.

 

[Thumprrr]

I tried to order the Badger Ordnance bolt roller grease tool from Brownells a few years ago and was told it was on the Directorate of Defense Trade Controls (ITAR) International Trade in Arms Regulations export control list.I guess they figure that we Canadians may pose a threat to US national security if we got our hands on these.