M14 Forum banner

Reloading the 168 Help and Questions

916 3
I am looking for feedback from anyone who is reloading any type of 168gr projectile in their M1A ONLY.

-What 168 are you shooting
-What kind of brass are you using
-What powder and what charge are you using
-What is your FPS
-What length barrel

I'm trying to figure out Lake City vs. commercial brass and if 1 or 2 grains will make a difference in the velocity and/or pressure.

Again anyone who is reloading a 168 I would really like to know what your load data. Thanks.
1 - 4 of 4 Posts

· Registered
Joined
·
225 Posts
You would get alo9t more responses in the Ammo section, try 42.0 imr4895witha 168 SMK in LC brass.

I am looking for feedback from anyone who is reloading any type of 168gr projectile in their M1A ONLY.

-What 168 are you shooting
-What kind of brass are you using
-What powder and what charge are you using
-What is your FPS
-What length barrel

I'm trying to figure out Lake City vs. commercial brass and if 1 or 2 grains will make a difference in the velocity and/or pressure.

Again anyone who is reloading a 168 I would really like to know what your load data. Thanks.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top