M14 Forum banner

Reloading for my Shotgun... Im lost

2K views 11 replies 12 participants last post by  NightFisher 
I loaded a ton of 12g on a cheap LEE press until I found a used MEC 600 jr, if you want to load 00 buck I think you have to drop the pellets by hand because I dont think any press will meter them. I use a piece of aluminum arrow shaft cut to length with a plug in on end that I fill with 00b pellets fill it to the top, that way I get the right number of pellets, I put the pellets in a pan and let them roll into the tube.

http://leeprecision.com/12g-load-all-ii.html

https://www.mecshootingsports.com/p-382-600-jr-mark-v.aspx

Casey
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top