M14 Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
249 Posts
Are you sizing the cases before trimming? It sounds like the neck of the case is not snug around the pilot, leading to the uneven trims. The necks must be a few thousandths under the bullet diameter to fit well on the pilot, at least with my Forster trimmer with 3-in-1 cutter.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top