M14 Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
3,677 Posts
Discussion Starter · #1 · (Edited)
Yes it seems really simple and yes it only applies if you use a progressive press, but I thought this explanation of how the RCBS lockout die works really helpful:
http://ultimatereloader.com/2010/09/19/rcbs-lock-out-die-part-i-theory-of-operation/

Also, I hadn't thought of setting the die up off the press but it's really easy with a Hornady press:
http://ultimatereloader.com/2010/09/21/rcbs-lock-out-die-part-ii-setup-and-maintenance/

You all may know this already but I hope someone else finds it useful info. There's lots of other good info on the Ultimate Reloader page too. Their videos on different progressive presses were really helpful in deciding what to buy.
 

·
Registered
Joined
·
6,577 Posts
His vids set the standard, IMO. Great stuff.
 
1 - 2 of 2 Posts
Top