M14 Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
349 Posts
Discussion Starter · #1 ·
Got my first M14 back from the gunsmith last week; he assembled all my GI SA parts on a SA recvr. Shot it four times at the shop to safety/function test, but today was the first time I've gotten to take it out. I'm not real familiar with the sight adjustment, but monkeyed with it and am within an inch or so at 30-40 yards, so I should be able to move on out to 100 and still be on the paper, and able to dial it in. I did notice that when I ran the sight all the way up, and then tried to come back down, I had to put downward pressure on it and turn the knob to get it to move. Tension problem? Anyway, I hope to have pics sometime this week; I have a birch and an walnut stock for it and would like to see which one ya'll like best. tgw
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top