M14 Forum banner

Range failure - major FTE

2490 Views 29 Replies 17 Participants Last post by  Metallicat
I drove over an hour to the range today only to have the 3rd round completely lock up in the chamber. I was using Tubb's finishing ammo. I brought my firearm to a gunsmith and he was able to extract the round. It suffered from an LPS (never fired), and the shoulder was too wide which caused it to seize. The tip of the round is also slightly impacted from chambering. I called Tubbs and they want me to send pics.
  • Like
Reactions: 1
1 - 1 of 30 Posts
In your other thread I suggested not using that stuff in a gas gun. Not sure if you saw it in time. RNGR2
I just read that other thread, and was thinking that...

The world is now a little bit wiser? Maybe yes maybe no on the whole, but in that regard USNA
1 - 1 of 30 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.