In your other thread I suggested not using that stuff in a gas gun. Not sure if you saw it in time. RNGR2
Range failure - major FTE
I drove over an hour to the range today only to have the 3rd round completely lock up in the chamber. I was using Tubb's finishing ammo. I brought my firearm to a gunsmith and he was able to extract the round. It suffered from an LPS (never fired), and the shoulder was too wide which caused it to seize. The tip of the round is also slightly impacted from chambering. I called Tubbs and they want me to send pics.
1 - 2 of 30 Posts
I've used Tubb's bullets on old pitted hunting barrels, to smooth out some rough spots. Back then they only sold bullets.
I've you've run some thru an M1A, make sure you remove the gas cylinder and scrub everything out. You can flush out the spindle valve with hot water and a pipe cleaner.
I've you've run some thru an M1A, make sure you remove the gas cylinder and scrub everything out. You can flush out the spindle valve with hot water and a pipe cleaner.
1 - 2 of 30 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
M14 Forum
A forum community dedicated to M14 and M1A Rifle owners and enthusiasts. Come join the discussion about optics, ammunition, gunsmithing, styles, reviews, accessories, Modern, Devine, SOCOM, EBR, classifieds, and more!
Full Forum Listing
Explore Our Forums
Recommended Communities
