M14 Forum banner
1 - 20 of 22 Posts

· Registered
Joined
·
9,283 Posts
Discussion Starter · #1 ·
Does your Armscorp M14 receiver have "SILVER SPRING, MD" or "BALTIMORE, MD" stamped on the operating rod rail? This is research for the book M14 Rifle History and Development.

Thanks,

Different
 

· Registered
Joined
·
4,184 Posts
:D My Armscorp: Baltimore MD, My Fulton(Armscorp): Savage MD! ;)
 

· Registered
Joined
·
217 Posts
I have 2 Armscorp rifles and both are marked the same:
ARMSCORP OF AMERICA BALTIMORE, MARYLAND

1. Heal role mark:
U.S. RIFLE
7.62 MM M14 NM
ARMSCORP trade mark
0071XX

2. Heal role mark:
U.S. RIFLE
7.62 MM M14
ARMSCORP trade mark
A0070XX

The serial numbers are within 70 digits of one another.
Pics posted across the street.
 

· Registered
Joined
·
8,255 Posts
I used to have an Armscorp with a serial number in the A003XXX range and it had Silver Spring MD on the side of the oprod rail. I can no longer remember the exact serial number, bought it used back in 1992.
 

· Registered
Joined
·
392 Posts
Mine is marked:

On the op rod rail surface:

ARMSCORP OF AMERICA BALTIMORE MD

On the heel:

US RIFLE
7.62MM M 14

A0042xx

Also:
the reciever markings on this one appear to be engraved rather than roll marked.
The markings are not very deep and may be CNC engraved. The markings are very distinct and crisp, just not very deep.

geiman
 

· Registered
Joined
·
168 Posts
mine (17XXX) says 7790189 F
 
1 - 20 of 22 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top