M14 Forum banner
1 - 11 of 11 Posts

· Banned
Joined
·
30 Posts
Discussion Starter · #1 ·
Hawk and Fernando,
I would like to apologize to the both of you, your staff, SixTGunr, Karsten, Three Legged Dog, Red Dot and the forum membership, for any and all misunderstandings that have taken place on your web site and in any e-mail correspondence. I never wanted this to get like this and end up this way. I aplolgize for anything that has been taken as misleading or has been taken the wrong way. I would like to just put this behind us and move on to more positive things and focus on more constructive manner, then to focus on what has happened in the past. My intentions are to be more professional in the future.

Thanks,
Jeff
Preferred Customs
[email protected]
 

· Registered
Joined
·
3,627 Posts
Jeff ...

As far as I am concerned your apology here is acceptable and I wish you the best in your endeavors. We are all humans and capable of making mistakes occassionally as we are not perfect and by your taking the time to express yourself as you just did in a positive manner I would think that you are now headed in the right direction.

Once again ... Best of Luck

Six
 

· Banned
Joined
·
197 Posts
Hawk, Six or anyone in charge could make stuff go away otherwise this will be here forever. Sorta wipe the slate clean and start all over without all the BS too haunt you.

On a one on one, you do great stuff and keep doing it "Your Way" cause I garentee you I can't even copy my own patterns let alone something done by Six or a couple others.

Best advise I can give is for you to figure out this isn't a Mini 14 friendly bunch and these guys are about as fussy with stocks and who did them as a guy buying a C5R Corvette or a Saleen.

You got your feet wet, now jump in a test the water.....That is where we all started, one stock at a time and learn every step of the way.

Karsten
 

· Banned
Joined
·
30 Posts
Discussion Starter · #9 ·
So was the statement you made to Hawk to remove it? I've been painting since I was 16 and got a pretty good eye on patterns. If someone shows me something I do my best to do it that way. I'm now working on painting a shock that will look like the whole stock was made of carbon fiber. The trick is the bends and curves. After I get that down they will be ready to show. All done with House of Kolors paint
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top