M14 Forum banner

oprod fit

1070 Views 12 Replies 6 Participants Last post by  Chuck S
trying to install a GI oprod onto my SA. seems like it hits the bottom of the barrel. any ideas where to remove metal to make it fit?

thanks, shot
1 - 1 of 1 Posts

· Banned
Joined
·
572 Posts
What kind of barrel is it rubbing on? is it a heavy? when the oprod is installed and forward is it in line perfectly with the tail of the gas cylinder? if it isn't it will be crooked and will rub somewhere on the barrel. Usualy it is caused by the guide being off but sometimes a misindexed barrel.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top