M14 Forum banner

Newbie, sorta. Just picking up M1A Std, Syn today.

1430 Views 10 Replies 8 Participants Last post by  Sargtanzer
I'm the proud new papa of a 20 round old Springfield Std. Syn. stock M1A. Will pick it up today before lunch. Anything I should expect from this rifle? Any parts I need to replace ASAP? As far as I can tell, there are no milsurp parts, nothing with TRW or any such marking. This is straight Springfield. Crinkle finish syn. stock. This will be my first M1A, and I'm looking to get a feel for it before I get a feel for it, IYKWIM. I'd be satisfied with 1/2 to 3/4" groups at 50 yds, is this reasonable? I'm basing this on two Bushmaster 5.56's I've owned, one of which was sacrificed to get this rifle. Either one, A1 or EoTech mounted flat top, I could get 3/8" groups at 50 yds. I'm not expecting as much out of this one, but it would be nice. :) Anything I need to look out for, as this is the first rifle of this type I've owned. I'd appreciate any help you guys could give me. Thanks in advance for your time, effort, and experience.

J.
1 - 4 of 4 Posts

· Registered
Joined
·
6 Posts
Discussion Starter · #5 ·
First range trip today, some questions...

Got back from the first range session with the new rifle not long ago, and had a few questions and observations.

This is the first time I've ever fired an M1A, and second time firing a semiauto .308. After shooting so much 5.56, this rig is a blast! Much bigger boom, not much more recoil, surprisingly controllable in rapid fire, flash suppressors WORK(all shooting was done tonight by headlights), and lots of fun!

Now to the questions. First, I think I figured out why the rifle was traded in. Through the course of about 100 rounds, I had numerous FTE's. It occurred to me that the chamber had never been cleaned, and was probably sticky with grease or cosmoline, as the FTE's became less frequent with more shooting. I'll give it a good cleaning tonight, as it was too cold to do it at the range. I'd intended to do it before I shot it, but a coworker just had to see what it would do. I'll know better next time. Does this sound like something that would happen to a new rifle with a dirty chamber?

Second, I was shooting some cheap milsurp of unknown origin. It came in lead or solder sealed metal containers of of 1,000 rounds, in twenty round boxes marked 7.62 mm L2 A2, and ink stamped with a vertical arrow, 51, and POF in a circle. Date of manufacture is 18 Feb 1980. The headstamp is L2A2 POF 80. Any idea about where this stuff came from or its quality?

Sorry to be so long winded, but I think I'm going to enjoy this one, and want to get off on the right foot. Thanks for the replies!

J.
 

· Registered
Joined
·
6 Posts
Discussion Starter · #7 ·
The new kid.

justshoot said:
WELCOME sargtanzer !
I'm new to this rifle also. I was used to shooting a colt 6700 , got tiny groupswith it,shot it a bunch,but???.I wasn't happy with down range power. 6mos. with mia,900-1000rds later I have found the solution.
good luck with your new rifle. I hope you enjoy it as much as I enjoy mine. when all else fails "justshoot"
Well, I certainly enjoyed my first outing with the M1A. This one's a keeper, especially if I can get the FTE's sorted out in short order. Otherwise, it's GREAT! Down range power is an entirely different class than 5.56. At least against steel, we shot the hell out of an old junked car somebody hauled out to the range. 7.62 is hell on an engine block, hehe. I thought it was going to catch fire!

Anyway, I'm happy with it so far, excluding the FTE's which I believe to be caused by a dirty chamber/improper cleaning. I'm also happy with my 5.56 within its niche, as an urban/home defense carbine without excessive penetration(M193, softpoints, etc). I'm trying to build a good all around battery, and I feel with this acquisition, i'm just about there. Thanks for the kind words JustShoot, enjoying your input in many other posts in the course of my research! Thanks to everyone responding to this thread, you have a great, supportive community here. Keep it going!
 

· Registered
Joined
·
6 Posts
Discussion Starter · #11 ·
Thanks for all the help guys!

I ordered two ratcheting chamber brushes the day I bought the rifle, but they're not here yet. I'm waiting to shoot it again until I can work on that chamber. I have a couple of Otis kits that I'll be using as well.

I'll probably order the GI extractors when I get back to work on Thursday. We'll see how she runs this Sunday. Thanks again for all the advice and the information on the ammo. Y'all take it easy.

J.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top