M14 Forum banner

1 - 1 of 1 Posts

81 Posts
Discussion Starter #1
My brother just picked up a NM M1a From the late 80's early 90's with the Stainless barrel, TRW bolt.
He wants to pull it apart for a inspection/ lube, but he can't get the trigger group out of the bedding. He said after he released the trigger guard, he's yanked, wiggled, pulled and can't budge it.
What is the best way to get it out without doing any damage to the bedding or the rifle?
1 - 1 of 1 Posts