M14 Forum banner
1 - 1 of 1 Posts

· Registered
488 Posts
Discussion Starter · #1 ·
Hi folks.

The last time I pulled my Ruger Government Target Model (MK678G) from the safe, I noticed that I could slightly rock the barrel/receiver assembly from side to side on the frame. That's a new one on me.

Methinks the lug that engages the area beneath the feed ramp might be a loose fit now (possibly since I broke it down after every range session). Maybe replace the pin on the mainspring housing assembly? It's chewed up too.


1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.