M14 Forum banner
1 - 1 of 12 Posts

· Registered
44 Posts
There are two Dewey bore guides advertised for the M-16. Make sure you get the one for the M-16 (M-16-1) with the Flash Suppressor and not the one for the M-16 with the bull barrel. It's a snug fit, but it will work.

(I can call Dewey monday, but I figured I'd ask here first so I can perhaps place my order sooner).

I need to order a muzzle guide and rod (I only have the otis system so far). I have a standard sized, custom built LRB m14, but seeing I'm in the PRK I had to add the muzzle brake and opted for the one from Smith Enterprise.

The Dewey muzzle guide page says they have one for the CA legal brake, but meant for the .75"dia. Springfield model. The Smith model I have is .86" dia.

Will the Dewey guide still work? Is there another model I can use? Does anyone else use this same brake and which guide do you use? Am I missing something very basic about cleaning an M14 from the muzzle end?

Brownell's carries this guide ( http://www.brownells.com/.aspx/pid=81/Product/M14_M1A_BORE_GUIDE ), that is meant to fit a flash suppressor exactly, but someone had posted here that you had to use a .22 cal rod. And I'm not sure it'd fit the brake as well.

1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.