M14 Forum banner

Muticam colors

751 Views 10 Replies 9 Participants Last post by  Ringer
What would you recommend a guy that wants to paint a USGI stock multicam?

I would probably end up using spray paint as I don't have anything to paint with.
1 - 1 of 11 Posts
I'm curious how to keep the paint from stacking..at the pattern edges..so it all looks like one uniform layer
cut your camo pattern out of newspaper and loosely tape it so it isn't lying flat against the stock and you will get 'feathering' that doesn't stay flat on the stock.
Decide on your base color and everything should go over the top of it.

If you can keep hard lines from forming in the paint yo will be good to go.
It can be time consuming but it's worth the wait to go slow.

After you finish you can lightly sand to blend any hard lines
  • Like
Reactions: 2
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top