M14 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
4,777 Posts
Discussion Starter #1
I understand that the thread pattern for bolting to the side of receiver is standard. My question pertains to the actual bolt and cam lever that hold it to the rifle. I just won a mount off Ebay that is missing those 2 things, so I needed to find a replacement. The mount has an nsn on it but it doesn't match up to any of smiths listed items but it looks like one. Would prefer to order the hardware from sadlak just want to make sure it'll work. Any help is appreciated!
 

·
Registered
Joined
·
4,777 Posts
Discussion Starter #2 (Edited)
Well I figured out what mount it is. Sei 2008. Just trying to find out if the mounting bolt and cam lever have to come from them or if I can use sadlak hardware. Don't really want to have to pay sei for anything...disregard. Got it handled. Was a dumb question, I know.
 

·
Registered
Joined
·
1,091 Posts
the Hex Screw is 12-32 UNF. Our Sadlak Hex Screws are 3/16 lg. They should work with the SEI mount as should be the Cam Washer.

All receiver threaded holes are 12-32 UNF but some mounts require either a longer screw or a shorter one.
 
1 - 3 of 3 Posts
Top