M14 Forum banner

Mags won't stay in

784 Views 5 Replies 5 Participants Last post by  Foxfire32
One of my M14s won't reliably keep the mags in place. It seems that the mags are OK (all USGI) since my two M1As hold them fine. Is there a simple solution?

Dave Dillehay
1 - 1 of 6 Posts
Remove the stock.

Assemble the trigger housing back into the receiver.

Lock the bolt to the rear.

Try inserting the magazine. It is a lot easier to see the problem without the stock present. Sometimes the stock itself is the problem.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.