M14 Forum banner
1 - 3 of 11 Posts

· Registered
3,531 Posts
Aloha SJS:

Remove the magazine floor plate, by sticking something into the small hole (like a punch tip or small screw driver) lift up the lip gently and the floorplate will slide out.

Remove the magazine spring. Take it easy and it won't jump out at you... and the magazine follower will be attached at the other end of the magazine spring (it will come out as one unit).

That should be it... magazine floorplate, magazine spring, magazine follower and the magazine body...

Reassemble in reverse of this procedure...

I hope this helps...

Aloha and Best Wishes,

Tom O.
1 - 3 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.