M14 Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
5,545 Posts
The above threads give you good advice. I second looking up Tony as his work is great.
Also, not that you would, but , do not let anyone tell you to just replace the windage knob with a GI - NM national match 1/2 MOA knob. If you were to try that you could damage threads.... the base you have has courser threads than an NM base. If you wanted to change the windage knob out for NM, the base would have to be changed to an NM base as well.
What you have will work well - just be-careful when you take it apart not to loose the spring and ball.
A simple tightening will fix the problem you described.

And, don't over look the search feature on this site, lots of good info can be recalled for your reading pleasure.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top