M14 Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
762 Posts
Other than the detent for the windage it is identical to the M1 sight.
If it is moving on its own then the screw on the elevation side is loose.
Use a pair of channel locks with leather wrapped around the knob to avoid marring it. Using the channelocks to hold the knob, use a correct fitting screwdriver to tighten the dog snot out of the screw.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top