M14 Forum banner

1 - 2 of 2 Posts

1 Posts
Discussion Starter #1
Had an issue with scope leveling.
Maxed out the elevation (low end, was shooting high) in order to zero.
Afterwards, attempted to check leveling of mount (SA 3rd Gen) and found
that very possibly the mount may have been slightly out of alignment, not 100%

What is a good bubble level spot on the Scout squad that is true parallel to the bore center-line? Tried several spots not completely sure if I have true bore level in the vice.

Found plenty of info on Reticle alignment and Cant, but nothing on
making sure the bore is level in elevation.

Looked around, and if this is an "asked and answered already", appreciate
a link to the info.
1 - 2 of 2 Posts