M14 Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
4,006 Posts
Extractor, spring and plunger; ejector but not the ejector spring.
The ejector on an m-14 is a different design than on the Garand. Every M-14 ejector has three cut facets on the front face. Every Garand ejector I've seen has two cut facets on the face. Not sure if the diameters are the same as I've never miced both. Don't ask me why the change was made, but it was on the M-14. It was either Gus or Art that confirmed this in a previous thread. dozier
 
1 - 5 of 5 Posts
Top