M14 Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
4,509 Posts
I have a Winchester M1 that will do the same thing if I use heavily parkarized clips the HXP is loaded into. All of the springs in the rifle were replaced with an Orion-7 kit, no change. If I use older GI clips that don't have the heavy park finish and are smoother, it runs fine. You might try other clips before you start replacing too many parts.
bullet guide lobe may be close to out of spec
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top