M14 Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
197 Posts
Discussion Starter #1 (Edited)
Do you want a bolt that will virtually last forever without breaking?

Do you want a bolt that you will NEVER need to worry about replacing even after untold thousands of rounds?

Do you want a bolt with a finish that gives you dry lubricity and is basically maintenance free?

If you want the ULTIMATE in durability and reliability for your AR15, THIS IS IT!!

Most bolts are made out of Carpenter 158 steel, which is very durable. However, the average life span in an M4 carbine who's gas system is much harder on parts is around 10k rounds. Stress fractures can begin to develop in locking lugs at around 4k rounds.

LMT's Enhanced bolt isn't made out of carptenter 158, it isn't even made out of SAE 9310 steel (cheaper than 158 but slightly stronger if properly heat treated). LMT's Enhanced bolts are made out of Aremet 100.

This is a steel that is TWICE AS STRONG as C-158! Not 25% stronger, or 50% stronger, but 100% stronger. x2!!!

In addition, the bolt lugs have relief cuts to cut down on the stress the lugs see, the bolt is also designed so that the cartridge case is fully supported by the bolt face. LMT's Enhanced bolt also has a "lobster tail extractor" with dual extractor springs for easier and more positive extraction with a much longer life!

LMT's Enhanced bolt also has a "lobster tail extractor" with dual extractor springs for easier and more positive extraction with a much longer life!

LMT has reported that they have NEVER seen one of these bolt's break.


There is a story of a user who has broken every type of bolt in his short barreled full auto 7.62x39 AR carbine (7.62 ARs are known for being a lot more punishing on bolts). Every type EXCEPT a 7.62x39 LMT enhanced bolt!

People pay $2k+ for an AR15 that is viewed as having an indestructible (but proprietary) bolt (KAC). Have that same luxury at a fraction of the price with a DROP IN PART! Can be used in all barrel length ARs from pistol to 20" to improve reliability and durability.

I only have about 40 rounds through this bolt, but you would never even know it.

I'll let the pictures do the talking!





Only $175.....
$160 (July 4th PRICE CUT) to give your AR15 the ULTIMATE Bolt!!
 
1 - 8 of 8 Posts
Top