M14 Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3,891 Posts
If Krieger says it's an M1A barrel it will be threaded to fit the M14/M1A receiver.

What you might want to confirm though is the chamber, those will probably be short chambered meaning that a gunsmith will need to use a finish reamer to get the chamber to final headspace.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top