M14 Forum banner

Kreiger Specs?

692 5
These are the specs that Kreiger shows for IN STOCK barrels. I'm assuming this is all standard and correct because they have 4 exactly them same in stock now.

The only thing I'm not sure about is the breech diameter.

Thanks


Steel SS

Contour M1A MED

Length 22

Breech Diameter 1.1

Bore .3

Groove .308

Twist 12
1 - 6 of 6 Posts

·
Registered
Joined
·
3,839 Posts
If Krieger says it's an M1A barrel it will be threaded to fit the M14/M1A receiver.

What you might want to confirm though is the chamber, those will probably be short chambered meaning that a gunsmith will need to use a finish reamer to get the chamber to final headspace.
 

·
Registered
Joined
·
5,852 Posts
Breech diameter is how big the barrel is just prior to the threaded portion that screws into the receiver.

The medium contours were originally short chambered but you may want to ask if they still are. If not I'd recommend having it done.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top