M14 Forum banner
1 - 1 of 25 Posts

· Registered
1,222 Posts

I don't have a Socom but do have a STD M1A and I have done alot to my rifle like shimming the GC, Sadlak Oprod spring guide, Tin gas piston from Sadlak and reworked the stock by inletting it on the front end and shimming around the mag well and even with what I consider my best hanloads for this rifle I am only able to get 1.5" 2.5" avg with 40.0 of IMR 4895 and a Nosler 168 CC pill, you have to remember these are Service Rifles and yours is a CQC Rifle and if you are getting 2" groups at 100yrds that IMHO is pretty dam good
1 - 1 of 25 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.