[ParaGrunt]

Look at the right side of the breech and notice the little dimple/ridge. Should I be concerned about this? Headspace is good and functioning is good. Just a little curious about this.

 

[fubar]

paragrunt: i don't see the photos here. other probably don't either. when using yahoo for photo hosting the pics often do not work properly. however posting url link to your photo album on yahoo works liek a champ.

 

[Gun Guru]

Is at a winchester barrel?

 

[SixTGunr]

I don't see on either ... :wink:

Just that nasty ole red "x" ....

If need be sir send me the foto via email at [email protected] and I'll get her in there for ya ... :wink:

Six

 

[warbird]

ParaGrunt:

Do you mean the ridge on the right side of the ramp of the barrel??

If that's what you're refering to then it's O.K.My SAK barrel is very noticable as well.Some are not as pronounced as yours but as long as it feeds O.K. (and it should) don't worry about it.It's part of the manufacturing process when cutting the extracor.relief. :wink:

HTH


Fly high,shoot low and you'll hit'em every time.warbird

 

[wdigeorge]

If it functions fine and no problem feeding, I would just leave it. However, if it bothers you, you can probably polish that out w/ a dremel tool but be very careful not to take too much.