M14 Forum banner

I fixed it

831 4
I have a little dilema and looking for some input..I recently picked up a Sadlak Alum Scope mount for a great price. Mounted and Eotech XPS on it yet the bottom of the scope has more material on one side and not sitting level across. Im sure it will zero in well but Im very picky about these things. Do I dremel the mount to fit
1 - 5 of 5 Posts

·
Registered
Joined
·
1,010 Posts
I would, if I was you, get a cheap aluminum mount and hack it up.

Why ruin a good mount that can be used further down the road for other sights.

The eo's not cheap either.

Myself, i would set up the eo in the mill and recut it. or send it back to the factory.
 

·
Registered
Joined
·
585 Posts
send the EOTech back and make them fix it.
 

·
Registered
Joined
·
632 Posts
Discussion Starter · #5 ·
I figured it out. I removed the mount and reinstalled it all is perfect! The scope is sitting level as can be thanks for the input...
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top