M14 Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter #1
OK gents,

I was 50/50 on a field strip of my new NM M1A.

I read all the pros and cons by all the experienced shooters on this forum on breaking down a NM bedded rifle for an inspection prior to firing.

I decided to do it, carefully.

Not as bad as I had anticipated, Gentle, gentle, gentle and it came right out. All parts greased and looked good.

The bedding job looked great and I can't wait to "Send It" downrange.

I love the forum and thanks for all the archived posts relating to this subject. Attached is the bedding pic.

 

·
Registered
Joined
·
188 Posts
Thanks for posting that. I had that same anxiety based on posts when I got mine. Its on its way back from SAI and they 'adjusted' the bedding so it will be something to see how this compares.
Any chance you can post the bedding on the bottom of the stock where the trigger housing seats?
 

·
Registered
Joined
·
23 Posts
Discussion Starter #7
Let me know if these help or if I need to try something else. Its been raining for a while so I haven't been able to get some good light on the subject.. Today looks good so I will add some more.


 
1 - 7 of 7 Posts
Top