M14 Forum banner
1 - 1 of 3 Posts

· Banned
11,516 Posts
The thickness of the Armscorp receiver rail is aprox 3/8" where the Springfield is aprox 1/4". The 1/8" difference is about the same as the thickness of the middle section of the connector arm.

""thick enough that he has to modify his dummy kit "" I don't provide this modification unless requested for a nominal charge. Thanks, Hawk
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.