M14 Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #4 ·
What mount are you talking about? The receiver is heat treated so it is going to be harder than the mount.
It is a no name mount, the threads will not stay tight, even with blue loctite. It appears the threads are softer than the receiver, so when they are tightened down, the threads "pull". Then the mount comes loose. Any suuggestions on the right mount without breaking the bank ??? Ray
 

·
Registered
Joined
·
3,125 Posts
Hi,
There's a ARMS#18 on the PX right now. If you don't like someones price you can always make an offer. Thats the mount I use on my Poly and it went right on tight as a vault and no lock tight needed!
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top