M14 Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
253 Posts
Discussion Starter · #1 ·
I'd like to get some recomendations on hardware to convert an USGI synthetic stock into a folding stock with a AR-15 type pistolgrip.
I'd really like to use a hinge with a lock similar to the FAL Para.
Any ideas?
 

· Registered
Joined
·
632 Posts
The thing I would be concerned with would be cheek weld and with such a recoil it might not be so comfortable! Why don't you look into the Vltor line of stocks and do the telescoping stock. It also has an adjustment to raise the stock tube for scope acquisition. It's made of Fiberglass and has accessories as well.

Good luck and be sure to post pictures whe all setup!DI5F
 

· Registered
Joined
·
2,010 Posts
I almost forgot, since the AR pistol grips are designed to fit into the trigger guard of the AR receiver, and so a are open at the front , you might have an easier time if you were to use an AK type pistol grip that just bolts to the bottom of the stock.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top