M14 Forum banner

1 - 5 of 5 Posts

·
Very Old Salt
Joined
·
1,906 Posts
Discussion Starter #1 (Edited)
H. Sacks & Sons insanely striped stock with DAS and double struck 'P' on grip.

Got this stock in a trade deal. It was obviously wickedly striped so I just had to refinish it, gotta say it turned out insane. The catch, there is a crack from selector switch cutout to stock liner screw. It's only cracked clean through about 1/2" from selector cutout towards toward liner screw, the rest is surface crack only (can be seen from inside view of stock, couldn't get a pic of it with my phone.). I've indicated IN RED in the picture where the crack goes all the way through, again the rest of it is surface crack only. It could benefit from one or two brass nails or some epoxy, and I've never done that so I wouldn't even attempt it. Other than the crack, the stock is completely solid. No other deformities. No buttplate.

Refinished with teak oil and StewMac stains, wet sanded to 2000 grit, buffed with wood wax.

$75 SHIPPED, MAKE ME AN OFFER, I just want to find this one a good home.

Paypal gift preferred or USPS money order.
First "I'll take it" gets it. Follow with PM.





 

·
Registered
Joined
·
2,591 Posts
Sir, Sent an offer with a question Via PM.
 

·
Registered
Joined
·
2,591 Posts
I will take it per our PMs.
 
1 - 5 of 5 Posts
Top