M14 Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
55 Posts
Discussion Starter · #1 ·
Greetings fellow enthusiasts,
I took my new SA M1A Standard to the range for the 1st time yesterday and had a great time. After establishing my 200yd zero, I was experimenting with different shooting positions using a GI style sling from Brownells. Each time I would put any tension on the sling when getting into position, the adjustment buckle would come unlatched and the sling would loose all tension. Finally had to abandon the use of the sling for the day.

Any suggestions as to what I was doing wrong? Might I have a faulty buckle? Ay suggestion would be much appreciated. Thanks!
 

·
Registered
Joined
·
55 Posts
Discussion Starter · #5 ·
Thanks!

Great point about the possibility of a backwards installation. I had the buckle installed exactly backwards GI9 . After flipping around the other direction, it works as advertised. Thanks again for the help!
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top