M14 Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
363 Posts
Discussion Starter · #1 ·
Hey guys, just a quick question, after my range trip tomorrow it'll be time to disassemble the gas system for the first time for a good cleaning.

Anyway, I wanted to find out what I should put on the gas plug threads before reinstalling it?

I've heard you want to use a high temp anti-seize lubricant, but I'm not very familiar with these.

Thanks!
 

·
Registered
Joined
·
363 Posts
Discussion Starter · #3 ·

·
Registered
Joined
·
1,838 Posts
What about copper paste you need for installing brakes?
Wolf
 

·
Registered
Joined
·
1,439 Posts
I've been using the Loctite copper high-temp anti-sieze with good results. A little goes a long way.
 

·
Registered
Joined
·
4,961 Posts
Can you use the same Tetra grease that's used on the moving parts?

I ask because I'd rather not have to keep two types of grease...
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top