M14 Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
795 Posts
I love my Springfield M1A/M21. Although not a "true" M21 it is accurate. I think the added cost accounts for the stock. Otherwise it's a super match. But I do love the heavy stock.

There's a few of us here who have them. Check out the threads as they have a lot of info. And this is the place to find that info. Most of all everyone is very helpful.

As always we love pics of the stick, and the paper after holes have been punched.

Welcome aboard.
 

·
Registered
Joined
·
795 Posts
I placed a Sadlak airborne mount, spring guide a TiN piston in mine. Also tubs spring. Now I've taken it out twice and went from 2.25" groups to 1.5" groups between the two range visits.

My goal, taking me into the equation, is to get to 1 inch groups, give or take a quarter inch. At that point it's all shooter.

I'm running a Nikon monarch BDC 4-16x50 which seems to fine. But I want to step up to either a Leupold 6-20 LR/t or vortex viper 6-24x50. But from what I see you can't go wrong with US Optics.
 

·
Registered
Joined
·
795 Posts
You'll get plenty of suggestions here on glass. Sounds like you're looking for the 100 to 300 yard range. I'm just testing the rifles and going to see what I can do with it consistently up to 600 with a 168gr. Then get higher end glass and go out to 800 plus and use a 175 gr.

But I do plan on using this as my deer rifle from now on as it has surpassed my previous 30.06 rifle. Like... No comparison

With the right set up, for deer, within that range you have the upper hand. No reason to not love it as I'm sure you will.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top